If an emergency occurs, how quickly can I shut down the special gas cabinet?

I. Immediate judgement of the type of emergency

Determine whether the emergency is a gas leak, fire, electrical failure, or something else so that more targeted measures can be taken.

II. the emergency operation steps

1. Trigger the emergency stop button:

Special gas cabinets are usually equipped with an obvious emergency stop button, quickly find and press the button. This button will normally immediately cut off the gas supply and power supply of the special gas cabinet, preventing the gas from continuing to supply and may lead to further danger.

2. Close the main valve:

If time permits, locate the main valve of the special gas cabinet, usually a manual valve, and close it by turning it clockwise to cut off the source of gas.

3. Activate the ventilation system:

If there is a ventilation system in the area where the special gas cabinet is located, ventilation should be activated immediately to discharge the leaking gas outside, reduce the indoor gas concentration, and reduce the risk of explosion and poisoning.

4. Notify relevant personnel:

In case of emergency, immediately notify the personnel on site to evacuate the dangerous area and report the emergency to the relevant departments such as safety management department, fire department, etc., providing the exact location and description of the situation.

III. Follow-up treatment

1. Wait for professional handling:

After the emergency is initially controlled, wait for professional technicians and emergency responders to arrive at the scene for further treatment and assessment.

2. inspection and repair:

Professionals will carry out a comprehensive inspection of the special gas cabinet to determine the cause of failure and the extent of damage, and carry out appropriate repair and maintenance to ensure that the special gas cabinet is in a safe condition before it is put back into use.