Forged 3/4in Ferrule to 3/4in Ferrule to 1/2in Ferrule Reducing Union Branch Tee Stainless Steel Compression Fittings

The main performance characteristics of ferrule reducer tee:
1. Reducing function: it can realise the connection of pipes of different diameters, which is convenient for the design and installation of the system.
2. Good sealing: the ferrule connection can provide reliable sealing performance to prevent fluid leakage.
3. Pressure resistance: able to withstand a certain working pressure, the specific pressure resistance depends on the material and specifications.
4. Variety of materials: common materials are stainless steel, copper, carbon steel, etc., according to the different use of the environment to choose the right material.

Reducing Union Branch Tee
Type：RBT-1206
size：3/4″OD to 3/4″OD to 3/8″OD
Type：RBT-1208
size：3/4″OD to 3/4″OD to 1/2″OD
Material：SS316L
Working Pressure：3000psi

Ferrule reducer tee stainless steel 316 material in corrosive environments with good corrosion resistance, can resist acid, alkali, salt and other corrosive media erosion.

FAQ
Q: How to choose the right specification according to the actual demand?
A: Firstly, determine the range of pipe sizes to be connected, and select the corresponding reducer tee according to the maximum and minimum pipe diameters. Consider the working pressure, fluid medium and other factors to ensure that the selected specifications can meet the requirements of the system. At the same time, pay attention to the matching between the ferrule and the pipe to ensure the sealing and reliability of the connection.

Q: What are the precautions for installation?
A: Before installation, check whether the end of the pipe is clean and burr-free, so as not to affect the installation and sealing effect of the ferrule. Follow the correct installation sequence, generally install the ferrule on the pipe first, then connect the reducer tee with the pipe, and pay attention to moderate strength when tightening the nut to avoid over-tightening or over-loosening.
Ensure that the installation direction is correct, especially for specific flow direction requirements of the fluid system. Check after installation to make sure the connection is firm and without leakage.

Q: What problems may occur during use and how to solve them?
A: Leakage problems: If leakage occurs, first check that the installation is correct and that the ferrules are not damaged or loose. The problem can be solved by retightening the nut or replacing the ferrules. If the problem persists, the pipe or fitting itself may be defective and require further inspection and repair.
Clogging Problem: If the fluid contains impurities, it may cause the reducer tee to clog. The fitting can be disassembled for cleaning, or a filter can be installed at the pipe inlet to prevent impurities from entering.
Pressure loss: Reducing tees may cause some pressure loss, which needs to be considered when designing the system. If the pressure loss is too large, you can choose a more suitable specification or optimise the piping layout.

Q: What are the advantages compared with other types of tee fittings?
A: Compared with welded tee, it is easy and quick to install, no need for professional welding equipment and technology, and easy to dismantle and repair.
Compared with threaded tees, the ferrule connection is stronger, has better sealing performance and can withstand higher pressure.
Reducing function makes it more flexible in the design of pipeline system, and can meet the needs of different pipe diameter connection.

Q: How do I perform routine maintenance?
A: Regularly check the connection of the ferrule reducer tee to ensure that there are no loose or leaking problems. If problems are found, they should be dealt with in time.
For joints that are not used for a long time, you can apply anti-rust oil on their surface to prevent rusting.
When cleaning the piping system, be careful to avoid causing damage to the joints.

Q: How do I replace a damaged fitting?
A: Firstly, close the relevant valves to stop fluid delivery. Then disassemble the damaged reducer tee and clean the end of the pipe. Choose a suitable new fitting and install it according to the correct installation method. Test after installation to ensure there are no leaks or other problems.