it’s currently one of the most widely used solenoid valve in garden irrigation Applied in large area of lawn, Gym, agriculture, industrial dedusting and water treatment equipment
Features of Irrigation Solenoid Valve
1 | Globe and angle configuration for flexibility in design and installation. |
2 | Rugged PVC construction |
3 | Filtered pilot flow to resist debris and clogging of solenoid ports. |
4 | Slow closing to prevent water hammer and subsequent system damage. |
5 | Manual internal bleed operates the valve without allowing water into the valve box. |
6 | One-piece solenoid design with captured plunger and spring for easy servicing.Prevents loss of parts during field service. |
7 | Non-rising flow control handle adjusts water flows as needed. |
8 | Normally closed, forward flow design. |
Technical Parameters
1 | Model: 150P and 200P |
2 | Size: 1-1/2”, 2″ |
3 | end connection thread G, BSP |
4 | working pressure 0.1-1.04Mpa |
5 | flow range 1.14-70m³/h |
6 | water temperature ≤43degree |
7 | environment temperature ≤52degree |
8 | Material plastic |
1 | Size | 150P | 1-1/2”, 40mm (BSP female) |
200P | 2″, 50mm (BSP female) | ||
2 | Working pressure | 2″ | 1-10.4bar |
1-1/2” | 1-10.4bar | ||
3 | Flow rate | 2″ | 0.45-34.05 m³/h |
4 | Operation mode | valve element lock position,valve open, release position, valve close |