Design Feature:
1.Single-stage pressure reducer
2.Maternal and diaphragm use hard seal form
3.Body NPT:inlet and outlet interface 3/4”NPT(F)
4.pressure gauge:relief valve interface 1/4” NPT(F)
5.The internal structure easy to purge
6.Can set filters
7.Can use a panel or wall mounting
Technical Parameter:
Maximum Inlet Pressure | 500,1500psig |
Outlet Pressure Ranges | 0~15, 0~25, 0~75,0~125PSIG |
Safety test pressure | 1.5 times maximum inlet pressure |
Operating Temperature | -40°F to +165°F / -40°c to 74°c |
Leakage Rate Against Atmosphere | 2*10-8atm cc/sec he |
Cv value | 1.8 |
Material:
Body | 316L, Brass |
Bonnet | 316L. Brass |
Diafragm | 316L |
Strainer | 316L(10 μm) |
Seat | PCTFE,PTEE |
Spring | 316L |
Plunger valve core | 316L |
Typical Applications:
1.Labotary
2.Gas Chromatography
3.Gas laser
4.Gas bus-bar
5.petro-chemical industry
6.Test equipment
Flow Data
Dimensions:
Ordering Information
R13 |
L |
B |
B |
D |
G |
00 |
02 |
P |
Item |
Body Material |
Body Hole |
Inlet Pressure |
Outlet Pressure |
Pressure Guage |
Inlet size |
Outlet size |
Mark |
R13 |
L:316 |
A |
E:1500 psi |
H:0-125psig |
G:Mpa guage |
04:1/2″NPT(F) |
04:1/2″NPT(F) |
P:Panel mounting |
B:Brass |
B |
F:500 psi |
J:0-75psig |
P:Psig/Bar Guage |
05:1/2″NPT(M) |
5:1/2″NPT(M) |
R:With relief valve |
|
D |
L:0-25psig |
W:No guage |
06:3/4″NPT(F) |
06:3/4″NPT(F) |
|
|||
G |
M:0-15psig |
13:1/2″ OD |
14:3/4″ OD |
|||||
J |
14:3/4″ OD |
14:3/4″ OD | ||||||
M |
Other type is available |
Other type is available |