R13 Series stainless steel pressure reducers, singlestage diaphragm pressure reducing construction, stainless steel diaphragm pressure transmission, stable output pressure, applied in mass flow gas system for pure gases, standard gases and corrosive gases etc.
Characteristics of pressure reducer
The following factors need to be paid attention to when selecting the pressure reducer. Follow up the requirements of your specific use, and use this catalog to select the pressure reducer consistent with your parameters. Our standard is just the beginning of our service. We can modify or design control equipment to solve any problems in application.
Typical Applications
Labotary,Gas Chromatography,Gas laser,Gas bus-bar,petro-chemical industry,Test equipment
Design Feature of Gas Pressure Regulator
1 | Single-stage pressure reducer |
2 | Maternal and diaphragm use hard seal form |
3 | Body NPT:inlet and outlet interface 3/4”NPT(F) |
4 | pressure gauge:relief valve interface 1/4” NPT(F) |
5 | The internal structure easy to purge |
6 | Can set filters |
7 | Can use a panel or wall mounting |
Technical Parameter of R13 Single Stage Pressure Reducer
1 | Maximum Inlet Pressure | 500,1500psig |
2 | Outlet Pressure Ranges | 0~15, 0~25, 0~75,0~125PSIG |
3 | Safety test pressure | 1.5 times maximum inlet pressure |
4 | Operating Temperature | -40°F to +165°F / -40°c to 74°c |
5 | Leakage Rate Against Atmosphere | 2*10-8atm cc/sec he |
6 | Cv value | 1.8 |
Material of Pressure Regulator
1 | Body | 316L, Brass |
2 | Bonnet | 316L. Brass |
3 | Diafragm | 316L |
4 | Strainer | 316L(10 μm) |
5 | Seat | PCTFE,PTEE |
6 | Spring | 316L |
7 | Plunger valve core | 316L |
Ordering Information
R13 |
L |
B |
B |
D |
G |
00 |
02 |
P |
Item |
Body Material |
Body Hole |
Inlet Pressure |
Outlet Pressure |
Pressure Guage |
Inlet size |
Outlet size |
Mark |
R13 |
L:316 |
A |
E:1500 psi |
H:0-125psig |
G:Mpa guage |
04:1/2″NPT(F) |
04:1/2″NPT(F) |
P:Panel mounting |
B:Brass |
B |
F:500 psi |
J:0-75psig |
P:Psig/Bar Guage |
05:1/2″NPT(M) |
5:1/2″NPT(M) |
R:With relief valve |
|
D |
L:0-25psig |
W:No guage |
06:3/4″NPT(F) |
06:3/4″NPT(F) |
|
|||
G |
M:0-15psig |
13:1/2″ OD |
14:3/4″ OD |
|||||
J |
14:3/4″ OD |
14:3/4″ OD | ||||||
M |
Other type is available |
Other type is available |