Structural features
(1) . Teqi series safety pressure reducer
(2) . the pressure reducer and pipeline are subject to pressure test and leakage test
(3) 2 “stainless steel pressure gauge with clear reading
technical parameter
Maximum inlet pressure: 3000,2200psi
Maximum outlet pressure: 25, 50100150250psi
Operating temperature: – 40 ℃ ~ 230 ℃
Flow: see flow curve
Leakage rate of pressure reducer: 2×10-8atm.cc/sec he
Cv:0.14
Structural materials
(1) Reducer body: stainless steel
(2) Pressure reducer valve seat: Pu, PTFE, PCTFE
(3) Panel air inlet connection: 1 / 4 “AFK ®, 1/4″ FSR,1/2″ FSR
(4) Panel outlet connection: 1 / 4 “AFK ®, 1/4″ FSR
(5) Diaphragm valve body: stainless steel
Selection table
R5200 | 1 | 1 | 1 | S | H | 1 | 1 | -N2 |
Series | Function Options | Outlet Type | Inlet Interface Type | Boay | Inlet Pressure | Outlet Pressure | Gauge | Gas Options |
R5200 | 1. Equipped with emptying and purging function | 1.1/4″NPT(F) | 1.1/4″Welding | S:stainless steel | H:3000psi | 1:25psi | 1:MPa | Blank: no gas identification |
2. No emptying and purging function | 2.1/4″swagelok | 2.1/4″NPT(M) | C:Copper nickel plating | M:2200psi | 2:50psi | 2:Bar/psi | N2 | |
3. Drain purge + pressure sensor | 3.3/8″NPT(F) | 3.3/8″Welding | L:1000psi | 3:100psi | 3:psi/Kpa | O2 | ||
4. Built in pressure sensor | 4.3/8″swagelok | 4.3/8″NPT(M) | 4:150psi | H2 | ||||
5.1/2″NPT(F) | 5.1/2″Welding | 5:250psi | C2H2 | |||||
6.1/2″swagelok | 6.1/2″NPT(M) | CH4 | ||||||
7.1/4″swagelok | AR | |||||||
8.3/8″swagelok | HE | |||||||
9.1/2″swagelok | AIR |