R11 Series stainless steel pressure regulator is Single-stage diaphragm, vacuum structure stainless diaphragm output. It has piston pressure reducing structure, constant outlet pressure, mainly used for high input pressure, suitable for purified gas, standard gas, corrosive gas etc.
Application
Laboratory ,Gas Chromatography ,Gas Lasers ,Gas Bus-bar ,Petrochemical Industry ,Testing Equipment
Design Feature
Single-stage pressure reducer
Maternal and diaphragm use hard seal form
Body NPT:1/4”NPT(F)
The internal structure easy to purge
Can set filters Can use a
Product Parameenters
1 | Maximum Inlet Pressure | 500,3000psig |
2 | Outlet Pressure Ranges | 0~25, 0~50, 0~50,0~250,0~500psig |
3 | Safety test pressure | 1.5 times maximum inlet pressure |
4 | Operating Temperature | -40°F to 165°F / -40°c to 74°c |
5 | Leakage Rate AgainstAtmosphere | 2*10-8atm cc/sec he |
6 | Cv value | 0.08 |
Materials of High Flow Nitrogen Regulator
1 | Body | 316L,Brass |
2 | Bonnet | 316L. Brass |
3 | Diafragm | 316L |
4 | strainer | 316L(10mm) |
5 | Seat | PCTFE,PTEE,Vespel |
6 | Spring | 316L |
7 | Plunger valve core | 316L |
Ordering Information
R11 |
L |
B |
B |
D |
G |
00 |
02 |
P |
Item |
Body Material |
Body Hole |
Inlet Pressure |
Outlet Pressure |
Pressure Guage |
Inlet size |
Outlet size |
Mark |
R11 |
L:316 |
A |
D:3000 psi |
F:0-500psig |
G:Mpa guage |
00:1/4″NPT(F) |
00:1/4″NPT(F) |
P:Panel mounting |
B:Brass |
B |
E:2200 psi |
G:0-250psig |
P:Psig/Bar Guage |
01:1/4″NPT(M) |
01:1/4″NPT(M) |
R:With relief valve |
|
D | F:500 psi |
K:0-50pisg |
W:No guage |
23:CGGA330 |
10:1/8″ OD |
N:Needle calve |
||
G |
L:0-25psig |
24:CGGA350 |
11:1/4″ OD |
D:Diaphregm valve | ||||
J |
27:CGGA580 |
12:3/8″ OD | ||||||
M |
28:CGGA660 |
15:6mm OD | ||||||
30:CGGA590 | 16:8mm OD | |||||||
52:G5/8″-RH(F) | ||||||||
63:W21.8-14H(F) | ||||||||
64:W21.8-14LH(F) |