Safety of solenoid valve
Generally, the solenoid valve is not waterproof. When conditions do not permit, please select the waterproof type, which can be customized by the factory.
The maximum rated nominal pressure of the solenoid valve must exceed the maximum pressure in the pipeline, otherwise the service life will be shortened or other accidents will occur in production.
All stainless steel type shall be selected for corrosive liquid, and solenoid valves of other special materials shall be selected for strongly corrosive fluid.
Corresponding explosion-proof products must be selected for explosive environment.
Characteristics of 2L Solenoid Valve
The automatic compensation seal of the top structure is adopted, which greatly prolongs the service life of the valve. The balance design of piston clearance greatly enhances the reliable use of the valve at higher temperatures.
Technical parameters
Maximum working pressure |
1.6MPA |
Operating pressure range |
0.2-1.6MPA |
Media |
Liquid gas steam<20 cst |
Media Temperature |
<180 degree |
Operation |
Pilot type |
Voltage |
AC:380V, AC220V, AC36V/50hz |
Insulation grade |
Bclass |
The power supply range |
-15%–+10% |
Power |
26W |
Respone time |
open <2 second close <3 second |
Install way |
Media flow direction and the on the arrow consistent. The coil vertically upward ,the working media clean and no particle. |
Model number |
A |
B |
c |
D |
E |
F |
G |
H |
Pipe Size |
Material(mm) |
2L-15 |
82 |
/ |
/ |
70 |
/ |
/ |
/ |
145 |
G1/2″ |
Brass |
2L-20 |
82 |
/ |
/ |
70 |
/ |
/ |
/ |
147 |
G3/4″ |
|
2L-25 |
91 |
/ |
/ |
70 |
/ |
/ |
/ |
158 |
G1″ |
|
2L-32 |
112 |
/ |
/ |
73 |
/ |
/ |
/ |
178 |
G11/4″ |
|
2L-40 |
112 |
/ |
/ |
71 |
/ |
/ |
/ |
175 |
G11/2″ |
|
2L-50 |
118 |
/ |
/ |
91 |
/ |
/ |
/ |
190 |
G2″ |
|
2L-25F |
110 |
12 |
2 |
115 |
70 |
4-10 |
65 |
195 |
DN25 |
|
2L-32F |
138 |
14 |
2 |
133 |
100 |
4-18 |
78 |
215 |
DN32 |
|
2L-40F |
139 |
14 |
2 |
150 |
110 |
4-18 |
89 |
225 |
DN40 |
|
2L-50F |
148 |
14 |
2 |
163 |
125 |
4-18 |
90 |
235 |
DN50 |